Concrete saw cutting and joint sealing
Control joints cut on time, expansion joints where slabs meet structures, and joints sealed to keep water out.
Open 24 hours, 7 days a week · Mississauga and the GTA
What is included
- Control joints cut in new slabs, walks and curbs
- Straight, clean cuts for removals and repairs
- Expansion joint material at buildings, curbs and columns
- Joint sealant over backer rod
- Removal and replacement of failed sealant
- Wet cutting, to keep silica dust down
Why timing matters
Concrete shrinks as it cures, and it will crack. A control joint decides where. Cut too late, and the slab cracks on its own, wherever it likes. Cut too early, and the saw tears the edges. We cut as soon as the surface will carry the saw, to the depth your specification calls for. That is typically about a quarter of the slab thickness.
Why seal joints
An open joint lets water and grit into the base. In winter that water freezes and lifts the slab edges. A sealed joint keeps the base dry and still lets the slab move. We size the joint, set backer rod at the right depth, and use a sealant suited to the traffic and exposure.
Typical jobs
- Joints in new sidewalks, slabs and loading areas
- Cutting out panels for repair or utility work
- Resealing joints in parking structures, plazas and warehouse floors
What affects the price
The total length of cutting or sealing, the depth of the cut, whether old sealant has to come out first, and access for the saw and water. We price by the metre for larger jobs.
How a control joint works
Concrete shrinks as it cures, and it will crack. Joints decide where.
- Expansion jointCompressible filler where the slab meets a wall, curb or column.
- Saw cutTypically about a quarter of the slab thickness, or as specified.
- Backer rod and sealantKeeps water and grit out, and still lets the slab move.
- The crack follows the cutIt forms below the joint, out of sight.
- Dry baseA sealed joint keeps water out of the ground under the slab.
Thickness, concrete strength, joint spacing and slopes follow your project's drawings and specifications.
Photos from recent jobs
Saw Cutting & Joint Sealing work we have completed.
Questions about saw cutting and joint sealing
Short answers. Your quote covers the details for your site.
Can you fix a random crack?
A crack cannot be removed, but it can be routed and sealed to keep water out. Badly cracked panels are better replaced.
How do you control dust when cutting?
We cut wet. Water at the blade keeps silica dust out of the air.
Do you cut concrete indoors?
Yes. Tell us about ventilation and drainage, and we plan the slurry cleanup.
Where we do this work
We are based in Mississauga and work across the Greater Toronto Area. Pick your town for local details.
Related services
Often done on the same visit.
- Sidewalk & Walkway Repair→Cracked, sunken or heaved panels removed and replaced, and trip hazards made safe.
- Slabs & Pads→Shed and equipment pads, loading zones, bus lanes and heavy-duty paving, placed and finished in stages.
- Concrete Sealing→Sealers that protect sound concrete from water, de-icing salt, stains and everyday wear.
- Trench Drains & Channels→Trench drain channels set to line and grade, encased in concrete and finished flush with the slab.
Request a quote
Tell us about the job and we will get back to you with a written quote. The service is already selected for you.